Rogue Hoe Distributing LLC

If this hoe caught your eye — it’s for you! You’ll never find a better triangle hoe than this one. The one piece head is cut from a repurposed agri...

This strong cultivating rake is 10″ wide by 6″ high with teeth that are 2-5/8″ long by 5/8″ wide and spaced 1″ apart. The teeth are sharpened on th...

The triangle shaped head is 5.5″ at the top and down to 1.5″ wide at the bottom by 6.5″ high. Sharpened on three sides. Made from the flat no-till ...

This rugged 4″ wide field hoe will take care of large weeds, cut sprouts off of a stump, tear up sod, till your garden, or dig a trench. It is very...

Used mainly for landscaping and trenching, this tool is very strong with ¼ inch thick high carbon steel. The head is 9″ long and 4″ wide on the big...

This hoe is made from the hardened steel of a thin, flat agricultural disc blade. It has a sharp, straight bottom edge and is sharpened on both end...

Our 8″ Crossover Rake is cut from the hardened steel of a flat no-till blade then glued and riveted to our heavy-duty 1.25″ x 60″ fiberglass handle...

Made in the Pulaski Style, this is sure to quickly become a favorite among firefighters and trail-builders. Weighs about 4 ¾ lbs, with a 4″ wide b...

The head measures measures 5½” x 9″ (W x H) and is sharp on 3 sides.  It weighs 3 lbs and has a 3/4″ pick on one end of the blade. This model is ha...

The head measures 5½” x 6½” (W x H) and is sharp on 3 sides.

A highly-requested Rogue Hoe, this tool is actually two of our hoes combined into one! Rake on once side, hoe on the other!  5" Head

Made in the Pulsaski Style, it weighs about 6 lbs and the head is 5½” wide by 13″ in length. The pick is 4″ wide.

The head measures 7″ x 6½” (W x H) and it’s sharp on 3 sides. It weighs 4¼ lbs.

A highly-requested Rogue Hoe, this tool is actually two of our hoes combined into one! On one side, you have the 70H head and on the opposite side ...